Wmv For Os X 10.9

Hey guys, Here is a guide on 'How to install OS X 10.9 on a PC with a Gigabyte 990FXA Series Motherboard and AMD FX Series CPU'.

In order to play the WMV videos on Mac, your video player will need to have WMV decoder as your Mac OS X system does not include this decoder by default. In this article, we will discuss how to play WMV videos on Mac by converting WMV to Mac compatible video types or install a third party video player to play WMV videos on Mac. Hi there, My laptop c rashed and my husband managed to put my original operating system on whi c h is OS X 10.9.5. I lost everything and my battery doesn't work any longer. I'm now trying to upgrade the operating system however I c an't seem to find any available option for an upgrade.

To date, Macintosh Repository served 1394448 old Mac files, totaling more than 273799GB! Downloads last 24h = 859: 178806.9MB Last 5000 friend visitors from all around the world come from. ‎Free MP4 Converter is professional MP4 Video Converting software, which helps you convert any video format to and from MP4 video for playback on iPhone (iPhone X/8/7/SE/6s/6s Plus/6/6 Plus/5s/5c/5/4S), iPad (iPad Pro/Air 2/mini 3/4/Air/mini 2), iPod, and Apple TV. It also supports converting video t.

It will also show you how to dual boot windows and OS X and even run the same windows install inside of OS X with VMWare Fusion.

Before we start, Here is the exact specification i am using for my Hackintosh install.

  • Motherboard: Gigabyte 990FXA-UD3
  • CPU: AMD FX-6100
  • Memory: Corsair Vengeance 8GB 1600Mhz (2x4gb)
  • Graphics Card: Sapphire AMD Radeon HD 7850 2GB OC Edition (1002 6819)
  • Operating Systems: Windows 8 and OS X 10.9.1

Ok so although this guide is intended for install on the above hardware it may or may not work on other hardware, It will most likely work on the UD3, UD5 and UD7 motherboards aswell as most modern Radeon HD Graphics.

Requirements

The following items will be required in order for this to work.

  • Windows 7, 8 or 8.1 (DVD or USB)
  • Niresh 10.9 (Torrent: http://www.niresh12495.com [it's the most downloaded file currently])
  • A USB Pen (Niresh - 10.9 - Mavericks USB Version.zip) or Dual Layer DVD+R (Niresh - 10.9 - Mavericks ISO Version.zip)
  • Access to both Windows and the Niresh Mavericks USB at the same time.
  • You need to take your time and be patient. Both windows and OS X take some time to install.
  • 1 HDD that is able to be completely formatted (wipe partition table)

Note: you don't need Windows if you don't want to dual boot

Preparation

I am not going to cover how to write the DMG file to a USB pen or DVD and instead will just link you to http://www.macbreaker.com/2014/01/instal...iresh.html (Step 1a if your currently in OS X and 1b if your in Windows)

So once you have the Bootable USB/DVD with Niresh on it we are ready to begin.

We need to format the HDD with the partition type MBR (for some reason when i did this with windows it didn't work) to do this will shall boot to the Niresh USB/DVD and at the prompt highlight 'Niresh Mavericks' and simply type 'amdfx GraphicsEnabler=No PCIRootUID=1 -v' and press 'Enter'.

If you don't plan on dual booting you can skip to 'Installing OS X 10.9'.

After a short time it should start booting to the OS X installer, Select your language and then in the menu bar Select Utilities > Disk Utilities > Select the HDD you want to use > Partition > 2 Partitions and then set the 1st as MS-DOS (FAT) name it 'Windows' and the 2nd as 'Mac OS Extended (Journaled)' name it 'Mavericks' now select 'Options' and make sure it's set to 'MBR (Master Boot Record)' then press 'Apply'

OK now the HDD is properly partitioned, We now move on to installing Windows.

Installing Windows 7, 8 or 8.1

Wmv for os x 10.9 high sierra

This is installed just like normal, Except you need to make sure it doesn't install the UEFI version (make sure to select the non UEFI DVD/USB entry from the boot menu)

Once your at the install simply do a 'Custom Install' and then install windows to the 1st Partition it will need to be formated to NTFS via the format button below prior to being installed.

After the install is complete go through the standard welcome screen and post install setup and then we can move on to installing Niresh's OS X 10.9

Installing Niresh OS X 10.9

And now we are on to the main event, Installing OS X.

Boot to the Niresh USB/DVD and then at the prompt highlight 'Niresh Mavericks' and simply type 'amdfx GraphicsEnabler=No PCIRootUID=1 -v' and press 'Enter'

Now you should be back at the OS X install screen, This time we will actually install it, Follow the on screen wizard until you get to the HDD Select page then select the 'Mavericks' disk but DO NOT PRESS NEXT/INSTALL instead press 'Customize' and uncheck the option 'GraphicsEnabler' located under the 'Graphics' section.

Now you can begin the install. Press the install button and prepare to wait a while depending on your SSD/HDD.

Fixing A Few Issues With OS X

Ok now we have OS X and Windows installed but most likely booting OS X from the HDD won't work and instead you will need to use the USB/DVD.

So once again boot to the Niresh USB/DVD but then at the prompt highlight 'Mavericks' instead of 'Niresh Mavericks' enter ' 'Kernel Cache'=amd GraphicsEnabler=No PCIRootUID=1 -v ' note the quotes need to be entered around the words 'Kernel Cache'.

After a little while it should boot to OS X and ask you to enter various information for the welcome screen, After you have entered this you should be at either the 'Login Screen' or the 'Desktop'.

If your using the exact same card as mine you most likely are not running at native resolution and are instead forced to 1024x768, To fix this we need to modify 2 kext files, if your running at native resolution skip the step below.

Load up a Terminal (Search > Terminal) and then type 'sudo su' and enter admin password, Now type 'nano /System/Library/Extensions/AMD7000Controller.kext/Contents/Info.plist' and then find '68181002' and change it to your device and vendor ID (mine is 68191002) once done press 'Ctrl or Win + X' and then repeat the same change for '/System/Library/Extensions/AMDRadeonX4000.kext/Contents/Info.plist'.

Now the graphics is sorted provided your using a similar card to mine atleast, Now we can sort out issues with the bootloader on the HDD, Download 'Chameleon Wizard' then run it and select 'Boot0HFS' as the install mode and then press 'Install'.

Now reboot and you should be able to boot from the HDD and select the 'Mavericks' option, you may need to enter 'GraphicsEnabler=No' and '-v' is useful to see more detailed/verbose information.

Congratulations you are done sorting out OS X, The steps below are optional but highly recommended.

Updating the AMD Kernel and OS X

Wmv For Os X 10.9 10.8

So you successfully got OS X working on your system, Now we should update OS X to the latest version (10.9.1 as of the time i was writing this) and the AMD Kernel to a newer and faster version.

Download the following file http://www.osx86.net/files/download/3736...4-support/ and extract it.

Next select 'Go' on the menu bar, and then 'Go to folder' and then '/', This will put you to the root of the OS X Partition, Now we need to replace the mach_kernel with the download mach_kernel file. Simply copy and paste and confirm the authentication.

Now we need to copy the downloaded 'System.kext' to '/System/Library/Extensions/', once this is done you will most likely get some errors don't panic!.

Now we load 'Kext Wizard' (installed with niresh) and select 'Repair' and 'Rebuild' under the '/System/Library/Extensions/'.

Once 'Kext Wizard' is done, Click the 'Apple icon' in the 'Menu Bar' and select 'Software Update' and 'Update All', This will take a little while, When asked to reboot say yes.

Now your system should reboot and you should be back at OS X at 10.9.1 instead of 10.9.0.

Running Windows 8 Inside OS X Using VMWare Fusion

Ok so, So far we have Windows and OS X installed to the same HDD on your PC, Now we will use the physical install of Windows inside of VMWare Fusion this will allow us to use Windows both inside of OS X and as a actual boot option.

Of Course this requires VMWare Fusion and this is a commercial piece of software therefore you will need to acquire VMWare Fusion prior to continuing.

Ok so now that you have acquired VMWare Fusion and installed it we can continue on to setting up the 'boot camp' partition.

Firstly we need to make sure that the windows partition is set to be the active partition, to do this we can load 'Terminal' > 'sudo su' > 'fdisk -e /dev/rdisk0' > 'f 1' > 'write' > 'y' > 'exit'.

Ok now it should have set the windows partition as the active partition, Now load up 'VMWare Fusion' and select 'More Options' and then 'Install from bootcamp' and then 'Create bootcamp virtual machine'.

Now the VM should be created and you should be able to simply start the VM and Windows 7, 8 or 8.1 should start and start the vmware tools install procedure. Now exit the VM and VMWare.

Now we need to restore the active partition back to OS X by doing the following load 'Terminal' > 'sudo su' > 'fdisk -e /dev/rdisk0' > 'f 2' > 'write' > 'y' > 'exit'.

And now we are done! click the 'unity' button in VMWare to integrate it even more. We now have VMWare with Windows + Windows as Dual Boot with OS X.

Extras

R9 270 and R9 270x users can use this file to get graphics working correctly (http://www.osx86.net/files/file/3711-amd...70-series/) DON'T UNCHECK GRAPHICSENABLER DURING INSTALL OF OS X

Thanks to Niresh and everyone else involved!

MacTheRipper has been very famous for its functionality in creating copies of your favorite DVD's by eliminating the issues with the data's region code, as well as overcoming CSS encryption problems. Indeed, this very useful application has served its purpose, but if you're using Mac OS X 10.9 Mavericks, you might not be as pleased as many others have been. While it works well as a freeware for ripping protected DVD's, users who've upgraded their system after Snow Leopard, this may not be as helpful as with its original release.

For one, people who have used MacTheRipper were not able to download updates. This is especially true for those who've only been using the free version, which does not provide these important updates for users of Mountain Lion, Mavericks, and so on. This makes it more viable for Mac users to find an alternative for MacTheRipper for Mavericks to rip DVD on Mac OS X 10.9.

Because of the many disadvantages in using MacTheRipper original version, it's recommended to get MacTheRipper for Mavericks alternatives that will have better functionality for these operating systems. A nice option would be Aimersoft DVD Ripper for Mac. This is an all-in-one converter that allows Mac users to rip DVDs to a wide range of video formats on Mac OS X 10.9 Mavericks and Mac OS X 10.8 Mountain Lion. It works by bypassing copy protection, and features support for formats that include WMV, AVI, MP3, and MP4. This simply means that it can be used to rip DVDs that you could watch on your iPhone, iPad, or Android tablets. This also supports a wider range of audio formats. Because of its versatility, it makes a better alternative if you're looking for MacTheRipper for Mavericks.

Aimersoft DVD Ripper for Mac also proves to be an excellent video and audio converter. Formats that this application supports include HD MOV, M4V, MKV, FLV, 3GP, VOB, WAV, and OGG. The DVDs you've ripped are also ready for editing with programs such as Final Cut Pro and iMovie, and you can even share them on YouTube. There is also a built-in editor where you'd be able to customize videos you've worked on the moment they're done.

How to use MacTheRipper for Mavericks

Wmv For Os X 10.9 10.10

If you want to use Aimersoft DVD Ripper for Mac to rip your DVDs on Mac OS X 10.9 (Mavericks), just follow the guide below:

1Load DVD files into the DVD ripper for Mavericks

Open the application and insert your DVD into the drive of your computer. To import your DVD files, click on Load DVD. The program will then prompt you to select audio tracks and subtitles of your preference.

2Edit videos on Mavericks before ripping (optional)

You can then click the Edit button if you want to enhance your videos right before you convert them. This is where you can add subtitles and effects, or crop your videos.

3Choose an output format

Afterwards, click on Profile and choose AVI for the output format of the video. Here, you can customize parameters such as bit rates, resolution, and frame rates through Settings. Clicking on Browse will set the folder where you'd be saving the ripped AVI files.

4Start to rip DVD on Mac OS X 10.9 Mavericks

You may then click Start to rip your DVD to AVI. When finished, you could then find the AVI file by clicking Find Target.

(Note: When you are using Aimersoft DVD Ripper for Mac in ripping DVDs, do pay attention on the dialog box as the DVD is being loaded. If the application is unable to decode or load your DVD, tick the other option for the loading mode and press OK. It's also necessary to edit the size of your videos as you'd be able to see on the output preview, depending on what media device you'll be playing them, so you would have maximum viewing pleasure with the resulting video file.)

Why you need MacTheRipper for Mavericks

Wmv For Os X 10.9 El Capitan

Specifically, in MacTheRipper 2.6.6, which is very easy to download and install, proves to have no usability for Mac users having versions past Snow Leopard. Furthermore, despite of having to upgrade even up to the program's latest version, information obfuscation will be of great hindrance to actually using the tool.

Wmv For Os X 10.9 High Sierra

Additionally, since most people are using lots of multimedia devices, such as iPad, iPhone, and Android, MactheRipper becomes very limited as far as versatility is concerned. The program only allows you to rip DVDs in the VIDEO_TS folder, which the mentioned devices do not support. Fortunately, with the features available on Aimersoft DVD Ripper for Mac, it proves to be a great alternative for MacTheRipper for Mavericks.