Vcds Lite 1.2 Activated Download

Vcds Lite 1.2 Crack Torrent; Crack Vcds Lite 1.2; How To Crack Vcds Software; Cracked Vcds Download; What is VCDS? VCDS lite v.1.2 (Registered & Activated) FULL VCDS-Lite is a Windows-based Diagnostic tool for VW/Audi/Seat/Skoda for non-dongle interfaces. With VCDS-Lite you can do an automatic scan of all controllers for Fault Codes.

Thread Rating:
  • 0 Votes - 0 Average
Ross Tech VCDS 19.6.2 Crack Cable With VCDS 19.6.2 Download Software
Post: #1
Ross Tech VCDS 19.6.2 Crack Cable With VCDS 19.6.2 Download Software
Ross Tech VCDS 19.6.2 Crack Cable Features Support Software and firmware update online. VAG COM 19.6.2 HEX CAN USB Interface Package With No vcds license key Generator, Customers need send us vcds activation file to get the vcds activation code for activation. Ross Tech VCDS 19.6.2 Crack Cable With VCDS 19.6.2 Download Software And VCDS 19.6.2 Loader New Release.
VAG COM 19.6.2 HEX CAN USB Interface Ross Tech VCDS 19.6.2 Crack Cable With VCDS 19.6.2 Download Software And VCDS 19.6.2 Loader VCDS 19.6.2 Download Software:
Genuine Ross Tech VCDS 19.6.2 Software Installation Guide: Ross Tech VCDS 19.6.2 Crack Cable Using Guide:
1. Download VCDS V19.6.2 software from official website or Installed VCDS software come with CDs
2. Download VCDS Loader from
3. Installed VCDS and VCDS loader to got a VCDS activation file
4. Send activation fille to sales for activated
5. Connect the VCDS VAG kable to the laptop, get activation file back from us, then input VCDS loader for register
6. Running VCDS software within VCDS loader Ross Tech VCDS 19.6.2 Crack Cable Kindly Note:

1. VCDS V19.6.2 software only fit with V-CDS interface.
2. Software need to be activated before use, just send 'request_license' to us([email protected]), we will activate for you.
3. Pls close your anti-virus software when install or running
4. Please open the VCDS software from VCDS loader ,don't derectly open VCDS software
5. If you want to update the V-CDS software, can download and install the newest software version from, but don't remove the V-CDS loader.
6. If your laptop is 64bit, when install the V-CDS software, please choose remember to choose 'Install 32-bit EXE on 64-bit System' . China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Attached File(s)Thumbnail(s)
OBD2Store, proud to be a member of GarageForum since May 2018.
Thanks given by:zig , veljo , domepate

Vcds Lite 1.2 Activation Download

Post: #2
RE: Ross Tech VCDS 19.6.2 Crack Cable With VCDS 19.6.2 Download Software zig, proud to be a member of GarageForum since Nov 2019.

User(s) browsing this thread: 1 Guest(s)
Current Version

VCDS-Lite for all 3rd party and 'Dumb' Interfaces on 2005 or older VAG cars

Vcds Lite 1.2 Activated Download Free


Vcds Lite 1.2 Full Registered Activated Download

VCDS-Lite is Copyright 2012 by Ross-Tech LLC / Uwe M. Ross. All rights are reserved.
De-compilation, disassembly, reverse-engineering, alteration, use as a reference tool for the purpose of developing a product with similar functionality, and re-distribution in any form without the prior written consent of the author is prohibited.
The unregistered shareware version of VCDS-Lite is free for non-commercial use
, but no support of any kind is available. Use in a commercial environment requires registration.

By downloading this software, you acknowledge that this Program is provided 'as is' and 'with all faults, defects and errors' and that all use of the Program is at your own full risk. It has been extensively tested, but we cannot guarantee it will work correctly with every system in every car. We will make our best effort to fix any bugs and to enhance the program, but we specifically disclaim any liability for damage to your computer or your car, and we do not promise to have any particular enhancements available on any specific date.


  • If you have a HEX, KEY, KII, or Micro-CAN interface, you're on the wrong page. Please go here instead.

  • Download the self-installing distribution file.

  • Run it and follow the prompts to allow it to install itself.

  • You must install VCDS-Lite on your PC's hard disk! It will not work properly if you try running it directly from a floppy or CD. However, you can use a floppy or CD to move the distribution file from a PC with internet access to another PC that does not have internet access.

  • Connect an appropriate interface between the computer and the car. Ross-Tech does not supply interfaces for VCDS-Lite. VCDS-Lite works with some of our old interfaces from many years ago, as well as many 3rd-party interfaces.

  • Turn the car's ignition switch ON. No need to start the engine.

  • Start the VCDS-Lite program:

    • Click [Options] and select the correct communicationsport.

    • Use [Test] to confirm that the program can use the port and find the interface.

    • Then [Save].

  • Now Play. Make sure the software can reliably access all the control modules that it should in your car. See our Application Charts. Read Fault Codes from some modules.

  • In order to get access to some of the more advanced functions, will need to register and activate the software. The exact differences in functionality between the unregistered/shareware and registered/activated versions are summarized in this handy chart.

Note to registered users updating from older versions:

  • If you're updating from VCDS-Lite version 1.0 or 1.1 you should not need a new activation.
    Simply install VCDS-Lite in the same location and it should use your existing activation.

  • If you're upgrading from an older version such as VAG-COM version 311 or 409, you will need a new activation.

    • First, install the VCDS-Lite and test it thoroughly in shareware mode as described above.

    • Then go here and fill out the appropriate form - or buy a license if you don't have one yet.

Release Notes:

  • VCDS-Lite works with most 3rd-party 'Dumb K-Line' interfaces
    as well as the following ancient low-tech Ross-Tech Interfaces, the last of which we sold early in 2004:

  • VCDS-Lite works with all standard versions of Windows, from Windows 95 though Window 10.
    Both 32-bit and 64-bit Windows builds work fine, but if you're using a 3rd-Party USB interface, keep in mind that it is your interface supplier's responsibility to provide a driver for his hardware.

  • VCDS-Lite does NOT work on Windows RT
    Windows RT runs on devices with ARM (instead of x86) CPUs and normal Windows programs like VCDS-Lite simply do not work on them.

  • The default installation folder is C:Ross-TechVCDS-Lite
    If allowed to install in the default location, it should not interfere with an existing Ross-Tech software on your PC.

  • To remove older versions, simply delete the shortcuts from your Start menu and Desktop and delete the old folders which are normally:
    C:VAG-COM or C:VAG-COM-Beta or C:Program FilesVAG-COM or C:Program FilesVAG-COM-Beta


VCDS-Lite Release 1.2
Published 19. November 2012

Digitally Signed, Self-Installing EXE File ~1.5MB
Includes the VC-Scope and TDI Timing Checker 'Plug-Ins'

Vcds Lite 1.2 Activated Download

Additional handy links:


Vcds Lite 1.2 Full Registered Activated Free Download


Vcds Lite 1.2 Activated Download Torrent

Current VersionVCDS-Lite