Install Libusb Windows 10

Libusb is a library for USB device access from Linux, macOS, Windows, OpenBSD/NetBSD, Haiku and Solaris userspace. It is written in C (Haiku backend in C) and licensed under the GNU Lesser General Public License version 2.1 or, at your option, any later version (see COPYING). This is how you install libusb: sudo apt-get install libusb-1.0-0-dev Note that if you are using libusb in a C/C program you should include it the following way: #include libusb-1.0/libusb.h and not like this: #include libusb.h This is a common mistake that new users make. Then finally you compile like this. Take note libusb-win32 0.1.x version is only kept here for historical reasons, they should be only used with Windows 98SE/Windows ME. They will not work under Windows Vista and above and may cause your system to hang. Folder libusb-win32-snapshots contains old snapshot release files for libusb-win32 and should not be used. I was able to use this to write Visual C 2008 code on Windows 7 that talks to a FadeCandy to control my Christmas tree lights. It was easy to download and write working code, thanks! Suggestions include: 1) libusb.h has three structs with arrays with 0 elements. This causes compiler warnings as VC 2008 doesn't define STDCVERSION.

  1. Install Libusb Windows 10
  2. Install Libusb Windows 10 Download
  3. Install Libusb Driver Windows 10
  4. Install Libusb Windows 10 Pro
  5. Install Libusb Windows 10 64-bit
  6. Install Libusb On Windows 10
09 Jun 2018, 12:00am TZ +00:00

How to Install Libusb Driver in Windows 7/8/10 XM-07 can be configured 4 different devices. The configuration software was written by Python.

Its common that one needs to use a programmer from the Arduino IDE, but onWindows 10 things are not as simple. Many times the drivers installed are notcorrect hence the avrdude tool in the Arduino IDE refuses to work.

Now, we have a way to do this programming in Linux as well.Have a look at my latest articleProgramming Arduino Bootloader using Avrdude with AVRISP mkII in Manjaro (Arch Linux).

Here we would look at a way to make that possible.

The idea would be first to get the Libusb-Win32 driver installed which isessential for the avrdude to work.

Note: In case you have AtmelStudio installed this might have difficultly,due to the presence of the Jungo WinUSB driver. We would look into movingaround that.

Let’s assume that on the PC we have the following situation:

Install Libusb Windows 10

  1. No drivers installed for AVRISP mkII
  2. We have Admin access
  3. We have internet available

Getting Libusb-win32#

The libusb-win32 package available from Sourceforge.

We just need to download the latest available release version of the package.

Currently it is as on June 2018.

Make sure to get something on the similar lines.

If you do not find, just go the Files section of the Sourceforge and go to the libusb-win32-releases folder. Select the latest version folder anddownload the file similar to the above.

Setting Up Driver#

Next, unarchive / unzip the Zip file as on June 2018.

Inside would be a directory structure similar to :

1. Open bin directory.#

2. There in execute the inf-wizard.exe after connecting the AVRISP mkII.#

3. Press the Next button.#

4. Select the AVRISP mkII in the list#

The Ids would be -

VendorID: 0x03EB

ProductID: 0x2104

Click Next to start the Ini creation process

5. Device Configuration#

Do Not Touch this

Click Next to Proceed.

6. Save the INI file#

Next it would ask to save an INI file with the name AVRISP_mkII.inf

Create A directory Named AVRISP_mkII-Driver.

Navigate to this directory and then Click on Save.

Next Click on Done to continue.

7. The Driver Directory#

It should look something like

Disable the Driver Signing check#

We would be disabling the Driver signing check temporarily.

  1. Hold Shift and select Restart from the Start menu.This would enter the advance setup mode.

  2. In Advanced Setup mode : Select Troubleshoot ->Advance Options

  3. In Advanced Options click on See more recovery options

  4. Next Startup Settings - This would reboot the PC and come to anotherreboot screen displaying options with function keys to select them.

  5. Press F7 this would select to Disable Driver Signature Enforcement -Again the system would reboot into normal windows.

  6. Now Open the Device Manager : Right click the AVRISP mkII under Other devices and select Update driver.

  7. Select the Directory Location where we earlier stored the generated driver.

  8. Windows 10 would show Warning about driver having no signature.Don’t worry its not a problem just select Install Anyway…

  9. Now you should be able to see libusb-win32 devices under which theAVRISP mkII is present in Device Manager

  10. We need to restore the Driver signing. Open an Administrator Command Prompt.

  11. In Administrator Command Prompt Type Command :BCDEDIT /set nointegritychecks OFFThis would re-Enable the Disable Driver Signature Enforcement

  12. Reboot the PC normally.

Note: The Easy way to the enable and disable Driver Signature EnforcementAre 2 commands for an Administrator Command Prompt:

  1. To disable device driver signing, type BCDEDIT /set nointegritychecks ON then press Enter
  2. To enable device driver signing, type BCDEDIT /set nointegritychecks OFF then press Enter


This completes the Installation of the Driver.

Now we can try and check in the Arduino IDE if the avrdude interface works withAVRISP mkII

The generated Driver is included here.

Latest version

Install Libusb Windows 10 Download


Python binding for the libusb C library.

Project description


Python libusb module is a low-level binding for libusb C library.
It is an effort to allow python programs full access to the API implementedand provided by the well known *libusb* library.
libusb is a lightweight Python package, based on the ctypes library.
It is fully compliant implementation of the original C libusb 1.0 APIby implementing whole its functionality in a clean Python instead of C.
libusb API 1.0 documentation can be found at:
libusb-1.0 API Reference

libusb uses the underlying libusb C shared library as specified inlibusb.cfg (included libusb-X.X.* is the default), but there is also abilityto specify it programmatically by one of the following ways:

About original libusb:

Borrowed from the original website:

libusb - A cross-platform user library to access USB devices


libusb is a C library that provides generic access to USB devices.It is intended to be used by developers to facilitate the production ofapplications that communicate with USB hardware.

It is portable: Using a single cross-platform API, it provides accessto USB devices on Linux, OS X, Windows, Android, OpenBSD, etc.

It is user-mode: No special privilege or elevation is required for theapplication to communicate with a device.

It is version-agnostic: All versions of the USB protocol, from 1.0 to 3.1(latest), are supported.

What platforms are supported?

Install Libusb Windows 10

Linux, OS X, Windows, Windows CE, Android, OpenBSD/NetBSD, Haiku.

For additional information, please consult theFAQor theWiki.


  • All necessary things are installed during the normal installation process.
  • ATTENTION: currently works and tested only for Windows.



  • Python 3.6 or higher
    • 3.7 with C libusb 1.0.22 is a primary test environment.
  • pip and setuptools

To install run:



  • Development is strictly based on tox. To install it run:

Visit development page.

Installation from sources:

clone the sources:

and run:

or on development mode:


Licensed under the zlib/libpng License
Please refer to the accompanying LICENSE file.


1.0.23b7 (2020-11-19)

  • Ability to specify the underlying shared library programmatically.
  • General update and cleanup.
  • Setup update.
  • Removing dependence on atpublic.
  • Fixed docs setup.
  • Fix for hotplugtest example.

1.0.23b1 (2020-09-15)

  • (partially; without libusb_wrap_sys_device, because
    original Windows dlls do not export this function).
  • Add support for Python 3.9.

  • Drop support for Python 3.5.

  • Setup update.

  • Cleanup.

1.0.22b9 (2020-01-17)

  • Added ReadTheDocs config file.
  • Setup update.

1.0.22b8 (2019-11-24)

  • Upgrade for Linux: libusb x64 v.1.0.21 -> v.1.0.22
  • Fix for error when the shared library is configured.
  • Cleanup.

1.0.22b6 (2019-11-23)

  • Initial support for Linux (libusb v.1.0.21 x64).

1.0.22b5 (2019-11-14)

  • Drop support for Python 2.
  • Drop support for Python 3.4.
  • Add support for Python 3.8.
  • Setup update and cleanup.

1.0.22b4 (2019-02-15)

Install Libusb Driver Windows 10

  • Setup improvement.
  • Update required setuptools version.
  • Some updates of examples.

1.0.22b2 (2018-11-08)

  • Setup improvement.
  • Update required setuptools version.

1.0.22b1 (2018-03-30)

  • Upgrade to the libusb v.1.0.22
  • Setup improvement.

1.0.21b4 (2018-02-26)

Install Libusb Windows 10 Pro

  • Improve and simplify setup and packaging.

1.0.21b2 (2017-12-18)

  • Fix the error of platform detecting.

1.0.21a3 (2017-08-20)

  • Next alpha release.

Install Libusb Windows 10 64-bit

0.0.1 (2016-09-23)

  • Initial release.

Release historyRelease notifications RSS feed

1.0.23b7 pre-release

1.0.23b6 pre-release

Install Libusb On Windows 10

1.0.23b5 pre-release

1.0.23b3 pre-release

1.0.23b2 pre-release

1.0.23b1 pre-release

1.0.22b9 pre-release

1.0.22b8 pre-release

1.0.22b5 pre-release

1.0.22b4 pre-release

1.0.22b2 pre-release

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Files for libusb, version 1.0.23b7
Filename, sizeFile typePython versionUpload dateHashes
Filename, size (251.8 kB) File type Source Python version None Upload dateHashes

Hashes for

Hashes for
AlgorithmHash digest