- Find K+DCAN & Enet Cables and the Bmw Software you need all in one place.
- BMW INPA Download software is the Ediabas K+DCAN diagnostic tool.V50.02 BMW Inpa Download software all function actived so no need to pay extra fee to get anthorization. VXDAS.com share BMW INPA download software on mega and also the software install video guide. INPA K+DCAN Interface for BMW Full OBD2 Diagnostic Tool with FT232RL Chip with Switch.
- BMW INPA software, free download: Below list the free download link collect form internet,if you find the link is invalid,pls tell me. BMW INPA 5.02 and Ediabas 6.4.7 download. INPA 6.4.3 Full.rar (thegrayshadow.com) INPA 6.4.3 Full.rar (mediafire.com) INPA Ediabas 6.4.3(MEGA) INPA Software (mediafire.com) INPA 5.0.6 rar (thegrayshadow.com).
Pre-installation Download: BMW INPA K+DCAN cable USB interface. (step1, step2, step3 and driver) to Windows(C folder of your PC. 2.Whilst in Windows(C, open 01.
BMW INPA 5.0.6 download here, which is tested without issues to work with K+DCAN usb cable with inpa bmw e46 and inpa bmw e90. Enjoy!
INPA v5.0.6 download:
EDIABAS v.7.30, Tool32 v.4.03, INPA v.5.06, WinKFP v.5.31 & NCS Expert v.4.01
(BIG THANKS to the contributor Kenny)
OS: Microsoft Windows XP, 7 (32/64bit), 8, 8.1 (32/64bit), 10 (32/64bit)
CD/DVD ROM Drive
1 Available USB Port (We recommend using the same USB port each time)
Minimum 1.2GHz Processor
Minimum 2GB of RAM
Intermediate experience with navigating Windows and installing software/drivers
You’re advised to use INPA software on Windows XP, tested by professional engineers at uobdii.com. bmw inpa windows 7 and bmw inpa windows 10 need luck
How to install inpa/ediabas:
Install BMW Standard tools 212
Copy INPA_Fxx_v.2 folder to C:EC-AppsINPA_Fxx_v.2
Copy EDIABAS to C:EDIABAS overriding existing EDIABAS Folder.
Run INPALOAD.exe from INPA_Fxx_v.2 BIN folder (C:EC-AppsINPA_Fxx_v.2BININPALOAD.exe).
bmw inpa cable:
K+DCAN USB cable is verified to work no issues with INPA BMW.
It’s the newest K+DCAN cable, released in the 2016 year with two new futures:
Feature 1: 2016 new k+dcan cable adds a switch on the adapter.
Bmw Dcan Driver Download
the switch on this cable to LEFT is for 7 pin, to RIGHT for 8 pin
8 pin for K-LINE communication (old DCAN cables cannot do it) for BMW from 1998 to 2008
Feature 2- This usb cable improves a lot in the PCB design. The new pcb comes with FT232RQ chip
the printed circuited board of better quality than the old one
INPA bmw and K+DCAN cable test results:
inpa bmw e46:
Purpose: reset BMW E46 airbag light
Tools for use:
The E46 is before 2000 without the OBD2 port and the DLC port is a round 20 pin connector while INPA cable has only 16 pin connector, so I need a 20 pin to 16 pin connector
The DLC port location on BMW E46:
Run INPA software on WIN XP. Turn on the ignition and click the “F2” button. And choose “Body” section then “Airbag”.
Go to the Error Memory: click the “F4” button.
Go to clear error memory: click the “F2” button.
Error was cleared!
reset BMW E46 airbag light successfully!
inpa bmw e90:
Purpose: Code BMW E90 (2008) Injector
Tools to use: k+dcan cable
connect the INPA cable with my E90 N54 via OBD port
run INPA software. And pressed F9 on the keyboard to select vehicle model E90
select Engine option -> MSD80 concerning option
press F9 system diagnostic
press [shift+F4] EOL injector option
The interface of MSD80 injector coding program, Check the injector parameters
copy and paste the injector code and pressed OK to continue
Notice that the injector code are stamped onto the injector in white, there will be 2 rows of 3 numbers, for example, here: 582 227
Finally check the injector value and press [clear] to reset it.
Recently i managed to install this software to my laptop and connect it to my E90 320d using K+DCAN cable. It is very good software to troubleshoot, diagnose fault, coding, workshop manual and register new battery with step by step guides. if not mistaken, BMW service centers and dealers also using this software.
it took me about two weeks to install and figure out how to connect to my car. here I share back the step by step guides how to install it for our benefit also for my future reference. thanks to those share files online..
Step 1: Download the program (prepare space around 25gb)
Step 2: Download and install RC cleaner
Step 3: Download this instruction and follow the instruction how to install the software
To connect to E90, you needK+DCAN cable and I purchased the cable from here. For F series, you need to buy enet cable.
To configure K+DCAN cable to E90, you need to install BMW Standard Tools 2.12 and can be downloaded from here. (choose COM9)
Connect the K+DCAN cable and install the driver and follow this step to set the COM port no (choose COM9)
That’s it. Connect the OBD cable from OBD2 socket to laptop, start your engine and enjoy!!
Wish this helps.